I2C Display
How to connect an I2C Display via QWIIC
Section titled “How to connect an I2C Display via QWIIC”🚧 THIS ZONE IS UNDER CONSTRUCTION 🚧
Section titled “🚧 THIS ZONE IS UNDER CONSTRUCTION 🚧”1. Flash the Firmware
Section titled “1. Flash the Firmware”First, upload the IMU example code to your tinyCore.
2. Visualize Data
Section titled “2. Visualize Data”Once flashed, connect to the Serial Monitor below to see the data stream.
Web Serial Not Supported. Please use Chrome, Edge, or Opera.